Potassium Tripolyphosphate MSDS

 1. SUBSTANCE IDENTIFICATION

1.1. Product Name: Potassium Tripolyphosphate
1.2. Description: Potassium Tripolyphosphate is a potassium salt of phosphoric acid manufactured through chemical synthesis.
1.3. Chemical Formula: K5P3O10
1.4. Molecular weight: 448.5
1.5. CAS #: 13845-36-8
1.6. EINECS #: 237-574-9
1.7. Manufactured by: Foodchem International Corporation, Shanghai China.
1.8. Supplied by: Foodchem International Corporation, Shanghai China.
1.9. Usage: In food as preservative

2. Composition

2.1. Potassium Tripolyphosphate: >95%
2.2. Hazardous impurities: Fluorid (F) ≤ 10 ppm, Iron (Fe)≤ 10ppm, Arsenic (As)≤ 3ppm, Lead (Pb)≤ 10ppm, Mercury≤ 1ppm, Heavy Metal (as Pb)≤ 15ppm

3. Physical/Chemical Characteristics

3.1. Physical State: Powder
3.2. Appearance: White powder
3.3. Odor: Odorless
3.4. pH: 9.6
3.5. Melting point/range: 630°C (1166°F)
3.6. Boiling point: Not available
3.7. Bulk density: 0.9 g/cm3
3.8. Solubility: Soluble in cold water, hot water

4. Stability/Reactivity

4.1. Chemical Stability: Stable under normal temperatures and pressures
4.2. Shelf Life: 24 months period
4.3. Hazardous decomposition: Not Applicable
4.4. Hazardous polymerization: Will not occur
4.5. Incompatible with: Not available

5. Handling/Storage

5.1. Storage: Kept in dry, cool, and shaded place with original packaging, avoid moisture, store at room temperature.
5.2. Handling precaution: Keep away from heat. Keep away from sources of ignition. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust.Do not store above 24°C (75.2°F)

6. Exposure Control

6.1. Engineering Controls: Safety shower and eye bath. Provide exhaust ventilation or other engineering controls to keep the airborne concentrations below their respective threshold limit value.
6.2. Respiratory protection: NIOSH/MSHA or European Standard EN 149 approved respirator
6.3. Eye Protection: Protective eyeglasses or chemical safety goggles
6.4. Skin Protection: Wear appropriate protective gloves and clothes to minimize skin contact.
6.5. Other: Consult professionals if Potassium Tripolyphosphate need to be handled under some special conditions.

7. Hazards Identification

7.1. Hazardous overview: Potassium Tripolyphosphate is Hazardous in case of ingestion, of inhalation. Slightly hazardous in case of eye contact (irritant). Non-irritant for skin
7.2. Contact with eyes: May cause eye irritation.
7.3. Contact with skin: Non-irritant for skin
7.4. Ingestion: May cause irritation of the digestive tract.
7.5. Inhalation: May cause respiratory tract irritation.
7.6. Other: Not Applicable

8. First Aid Measures

8.1. Contact with eyes: Flush immediately with plenty of water for 15 minutes and seek medical advice
8.2. Contact with skin: Wash with soap and water. Get medical attention if irritation develops. Cold water may be used
8.3. Ingestion: Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If large quantities of this material are swallowed, call a physician immediately
8.4. Inhalation: Remove from exposure, move to fresh air and seek medical advice immediately.

9. Fire and Explosion Data

9.1. General information: Non-flammable.
9.2. Flash point: Not Applicable
9.3. Ignition control: Not applicable
9.4. Dust control: Keep the handling area with adequate ventilation
9.5. Extinguishing Media: Not Applicable
9.6. Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container

- See more at foodchem: http://www.foodchemadditives.com/msds/1363